Table of Contents
- 1 Why is machine guarding important?
- 2 What are machine safety precautions?
- 3 What is one of the most common ways in which workers get hurt around machines?
- 4 What must be in place before operating equipment?
- 5 Why machines are covered when not in use?
- 6 Do fan blades require guards?
- 7 How many people does it take to operate a machine?
- 8 How many days can a person work without a machine?
Why is machine guarding important?
The purpose of machine guarding is to protect the machine operator and other employees in the work area from hazards created during the machine’s normal operation. This would include hazards of concern such as: ingoing nip points, rotating parts, reciprocating, transversing, and/or flying chips & sparks.
What are the OSHA requirements for machine guarding?
Machine safeguards must meet these minimum general requirements:
- Prevent contact: The safeguard must prevent hands, arms or any other part of a worker’s body from contacting dangerous moving parts.
- Be secure: Workers should not be able to easily remove or tamper with the safeguard.
What are machine safety precautions?
- Do not attempt to oil, clean, adjust or repair any machine while it is running.
- Ensure that all machine guarding is in place and functioning properly.
- Do not leave machines running unattended.
- Do not try to stop the machine with your hands or body.
- Always keep hands, hair, feet, etc.
What is point of operation guarding?
Point of operation guarding. 1910.212(a)(3)(i) Point of operation is the area on a machine where work is actually performed upon the material being processed. 1910.212(a)(3)(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded.
What is one of the most common ways in which workers get hurt around machines?
Getting On and Off Equipment or Machines. According to data maintained by OSHA, the most common cause of worksite injuries associated with equipment and machines is getting on and off of equipment and machines. A key to ensuring safety getting on and off equipment and machines is to check boots and gloves.
Why is it important that safeguards are located near where plant machinery and equipment are being used?
Safeguards should protect workers but not prevent them from operating a piece of machinery properly. Allow safe lubrication: Safeguards should allow for the safe lubrication of machines without the need to completely dismantle the guarding system.
What must be in place before operating equipment?
Before using a piece of heavy equipment, operators should follow these nine tips:
- Tip 1: Educate before operating.
- Tip 2: Wear proper clothing.
- Tip 3: Understand the jobsite.
- Tip 4: Complete a visual check.
- Tip 5: Use three points of contact.
- Tip 6: Practice starting procedures.
- Tip 7: Exhibit proper operating techniques.
Who is allowed to remove a machine guard?
Guards attached to mechanical equipment protect you from the moving parts of machines. Machine guards must never be removed and if a guard is damaged or missing, the machine must not be used until it can be repaired or replaced.
Why machines are covered when not in use?
Medicine when not in use should be kept covered as it has some acid and bases the react with oxygen and oxides are formed that may be poisonous for the body…
In what ways do machines put people’s health at risk?
The main physical risks include noise, hand-arm and whole-body vibration, and heat stress. The main mechanical risks include cuts, lacerations, needle punctures, crushing, and contact with machines, as well as falls from heights, slips, trips and falls on the same level, and trench cave-ins.
Do fan blades require guards?
As stated in your letter, the Occupational Safety and Health Administration’s (OSHA) standard at 29 CFR 1910.212(a)(5) requires employers to protect employees from exposed fan blades. If working with or near equipment exposes an employee to a hazard, in this instance, fan blades, then guards must be provided.
What is point of operation?
“Point of operation” means the area of the press where material is actually positioned and work is being performed during any process such as shearing, punching, forming, or assembling.
How many people does it take to operate a machine?
A machine will only need one person to operate it and then carry out duties which needed many people. An example is the transport industry. Initially, horses used to be the main means of transport. Each horse would need one individual to transport a person.
What are the advantages of machines in our daily life?
With the advent of machines, an individual using a machine can perform work which would have needed several people to carry out. A machine will only need one person to operate it and then carry out duties which needed many people. An example is the transport industry.
How many days can a person work without a machine?
An individual would have worked for a thousand days without the machine. This is thus reduced to just one day. If only two thousands day equivalent of human labour was available, the person will only work for two days only making him or her jobless for the rest of the remaining days (Penslar, 1995).
How do machines displace human beings effectively?
The combination of the fact that a machine can carry out work of several individuals at the same time and do work faster than humans makes it displace human beings effectively. A machine will perform a certain duty faster than human beings and at the same time perform duties of several human beings at the same time.